A Dump Truck, also known as a tipper truck or dumper, is a heavy-duty vehicle designed for transporting loose materials such as sand, gravel, coal, ore, and construction waste. The defining feature of a dump truck is its hinged box bed, which can be lifted at the front end to release the material via gravity.
Applications:
Construction Sites: Used for moving materials like soil, gravel, and sand.
Mining Operations: Transporting extracted ores and rocks.
Landfills: Carrying waste materials for disposal.
Road Construction: Hauling asphalt or other materials for road building and repair.
Agriculture: Used for moving bulk materials like manure or harvested crops.
Categories and Uses:
Standard Dump Trucks: Commonly used for general construction and landscaping projects.
Off-Highway Dump Trucks: Designed for use in mines and other off-road applications.
Heavy-Duty Dump Trucks: Capable of carrying larger loads and equipped for more challenging conditions.
Small Dump Trucks: Suitable for smaller-scale projects and confined spaces.
Maintenance and Care:
Regularly inspect the truck’s suspension and undercarriage for wear and damage.
Check the hydraulic system for leaks and ensure the lifting mechanism operates smoothly.
Maintain the engine and transmission according to the manufacturer's recommended intervals.
Lubricate moving parts and check tire pressure and condition regularly.
Keep the truck clean and address any issues promptly to prevent rust or corrosion.
FAQ：
Q: What is the typical payload capacity of a dump truck?
A: Capacities vary, but they can range from a few tons for smaller models to over 300 tons for the largest mining dump trucks.
Q: How does a dump truck's hydraulic system work?
A: The hydraulic system uses pressurized fluid to lift and lower the hinged box bed, allowing for the dumping of the load.
Q: What safety features are common in modern dump trucks?
A: Modern dump trucks may include advanced braking systems, rollover protection, and visibility aids to enhance safety.
Q: How often should a dump truck be serviced?
A: It is recommended to service a dump truck according to the manufacturer's guidelines, which may be based on hours of operation or mileage.
Q: What are the common types of axles used in dump trucks?
A: Common axle configurations include 4x2, 6x4, and 8x4, with the choice depending on the truck's intended use and load capacity.
Description | HOWO 8*4 26CBM dump truck | ||||
Drive model | 8*4 Left hand drive | ||||
Condition | New | ||||
Vehicle Main Dimensions | Overall Dimension(L*W*H)(mm) | 10300×2500×3300 | |||
Wheel base(mm) | 1800+3500+1350 | ||||
Wheel track(front/rear)(mm) | 2022/1830 | ||||
Approach/Departure angle(°) | 19/26 degree | ||||
Weight in KGS | Gross Vehicle Weight | 54000kg | |||
Curb weight | 14000kg | ||||
Max.driving speed(km/h) | 90 | ||||
Engine | Model | WD615.47 | |||
Brand | Sinotruk | ||||
Type | 4-stroke direct injection , 6-cylinder in-line with water cooling, turbo-charging and inter-cooling | ||||
Horse power(HP) | 371HP (Diesel) | ||||
Emission standard | Euro II | ||||
Gearbox | HW19710, 10 forwards&reverse | ||||
Clutch | Reinforced diaphragm clutch, diameter 430mm | ||||
Steering Gear | ZF 8098,power steering, hydraulic steering with power assistance | ||||
Fuel tank(L) | 300 | ||||
Tire | 12R22.5 All tubeless radial tire with one spare tire, total 13 pieces | ||||
Brakes | Service brake:dual circuit compressed air brake Parking brake:spring energy, compressed air operating on rear wheels Auxiliary brake:engine exhaust valve brake | ||||
Dump body | |||||
Thickness | Side | 6mm in high tensile steel Q345B | |||
Front | 6mm in high tensile steel Q345B | ||||
Bottom | 8mm in high tensile steel Q345B | ||||
Dump body size | L*W*H | 7300mm*2300mm*1500mm | |||
Tipping hydraulics | Tipping type | Front tipping type | |||
Tipping system | Complete set of HYVA brand hydraulics system | ||||
Our Advantage
1.Competitive Factory Price and Excellent Quality
2.More than 20 years' experience as original manufacturer
3.Products Quality Certification SGS CCC ISO TUV
4.Perfect after-sale service
5.Customized products are available as per clients' requirements
6.Export to more than 60 countries and regions
Warranty
1. One year quality guarantee for three key parts axles, engine, transmission or within 50000km, which comes the first.
2. Other spare parts could be supplied by OEM at factory cost prices.
3. Regularly follow up to know the vehicle's working status.
4. Free technical support during the whole life cycle of the truck and trailers (say 10 years);
5.Special service team with technial engineers are ready if any quality complains, will respond in 24 hours with feedback and solution.
Flexible Payment Term:
1. 100% TT
2. 30% TT in advance,70% before shipment
3. 100% USANCE LC at sight
4. TT in advance, balance in LC
Delivery time:
30-40 working days after receipt of advance deposit
Packing and Shipping:
Nude and wax, shipped in container ship, bulk vessel, flat deck or RO-RO ship
(1)Wax:
Do wax spray process to against the trailer body suffer seawater corrosion during shipping
(2)Package:
Stable fixing with steel wire,to protect the trailer during shipping
(3)Shipping:
Reliable logistic service from famous freight supplier makes transport process safely and promptly